ZyXEL Communications ZyWALL 110 User Manual page 744

Table 332 Maintenance > File Manager > Configuration File (continued)
LABEL DESCRIPTION
Apply Use this button to have the ZyWALL/USG use a specific configuration file.
Click a configuration file's row to select it and click Apply to have the ZyWALL/USG use
that configuration file. The ZyWALL/USG does not have to restart in order to use a
different configuration file, although you will need to wait for a few minutes while the
system reconfigures.
The following screen gives you options for what the ZyWALL/USG is to do if it encounters
an error in the configuration file.
Figure 515 Maintenance > File Manager > Configuration File > Apply
Immediately stop applying the configuration file - this is not recommended because
it would leave the rest of the configuration blank. If the interfaces were not configured
before the first error, the console port may be the only way to access the device.
Immediately stop applying the configuration file and roll back to the previous
configuration - this gets the ZyWALL/USG started with a fully valid configuration file as
quickly as possible.
Ignore errors and finish applying the configuration file - this applies the valid parts
of the configuration file and generates error logs for all of the configuration file's errors.
This lets the ZyWALL/USG apply most of your configuration and you can refer to the logs
for what to fix.
Ignore errors and finish applying the configuration file and then roll back to the
previous configuration - this applies the valid parts of the configuration file, generates
error logs for all of the configuration file's errors, and starts the ZyWALL/USG with a fully
valid configuration file.
Click OK to have the ZyWALL/USG start applying the configuration file or click Cancel to
close the screen
# This column displays the number for each configuration file entry. This field is a sequential
value, and it is not associated with a specific address. The total number of configuration
files that you can save depends on the sizes of the configuration files and the available
flash storage space.
Chapter 38 File Manager
ZyWALL/USG Series User's Guide
744