Wireless; Overview; What You Can Do In This Chapter; Controller Screen - ZyXEL Communications ZyWALL 110 User Manual

8.1 Overview

Use the Wireless screens to configure how the ZyWALL/USG manages the Access Points (APs) that
are connected to it.

8.1.1 What You Can Do in this Chapter

• Use the Controller screen
APs to connect to the network.
• Use the AP Management screens
to the ZyWALL/USG.
• Use the MON Mode screen
the friendly AP list.
• Use the Auto Healing screen
area of the managed APs when one of the APs fails.

8.2 Controller Screen

Use this screen to set how the ZyWALL/USG allows new APs to connect to the network. Click
Configuration > Wireless > Controller to access this screen.
Figure 135 Configuration > Wireless > Controller
C
(Section 8.2 on page 163) to set how the ZyWALL/USG allows new
(Section 8.3 on page
(Section 8.4 on page 175) to assign APs either to the rogue AP list or
(Section 8.5 on page
ZyWALL/USG Series User's Guide
163
H A PT ER

Wireless

164) to manage all of the APs connected
177) to extend the wireless service coverage
8