System Information And Console Port Speed; System Information; Figure 402 Menu 24.2: System Information And Console Port Speed - ZyXEL Communications ZYWALL 35 User Manual

Table 253 System Maintenance: Status Menu Fields (continued)
FIELD
RxPkts
Cols
Tx B/s
Rx B/s
Up Time
Ethernet Address
IP Address
IP Mask
DHCP
System up Time
CARD bridged to
You may enter 1 to drop the WAN connection, 9 to reset the counters or [ESC] to return to menu 24.

46.3 System Information and Console Port Speed

This section describes your system and allows you to choose different console port speeds. To
get to the System Information and Console Port Speed:
1 Enter 24 to go to Menu 24 - System Maintenance.
2 Enter 2 to open Menu 24.2 - System Information and Console Port Speed.
3 From this menu you have two choices as shown in the next figure:

Figure 402 Menu 24.2: System Information and Console Port Speed

46.3.1 System Information

System Information gives you information about your system as shown below. More
specifically, it gives you information on your routing protocol, Ethernet address, IP address,
etc.
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
This is the number of received packets on this port.
This is the number of collisions on this port.
This field shows the transmission speed in Bytes per second on this port.
This field shows the reception speed in Bytes per second on this port.
This is the total amount of time the line has been up.
This is the MAC address of the port listed on the left.
This is the IP address of the port listed on the left.
This is the IP mask of the port listed on the left.
This is the DHCP setting of the port listed on the left.
This is the total time the ZyWALL has been on.
This field shows whether the wireless card is set to be part of the LAN, DMZ or
WLAN.
Menu 24.2 - System Information and Console Port Speed
1. System Information
2. Console Port Speed
Please enter selection:
Chapter 46 System Information & Diagnosis
657