ZyXEL Communications ZyWALL 110 User Manual page 595

Table 249 Configuration > Object > AP Profile > SSID > Add/Edit SSID Profile (continued)
LABEL DESCRIPTION
Security Profile Select a security profile from this list to associate with this SSID. If none exist, you can use
the Create new Object menu to create one.
Note: It is highly recommended that you create security profiles for all of your SSIDs to
MAC Filtering Select a MAC filtering profile from the list to associate with this SSID. If none exist, you can
Profile use the Create new Object menu to create one.
MAC filtering allows you to limit the wireless clients connecting to your network through a
particular SSID by wireless client MAC addresses. Any clients that have MAC addresses not
in the MAC filtering profile of allowed addresses are denied connections.
The disable setting means no MAC filtering is used.
QoS Select a Quality of Service (QoS) access category to associate with this SSID. Access
categories minimize the delay of data packets across a wireless network. Certain
categories, such as video or voice, are given a higher priority due to the time sensitive
nature of their data packets.
QoS access categories are as follows:
disable: Turns off QoS for this SSID. All data packets are treated equally and not tagged
with access categories.
WMM: Enables automatic tagging of data packets. The ZyWALL/USG assigns access
categories to the SSID by examining data as it passes through it and making a best guess
effort. If something looks like video traffic, for instance, it is tagged as such.
WMM_VOICE: All wireless traffic to the SSID is tagged as voice data. This is
recommended if an SSID is used for activities like placing and receiving VoIP phone calls.
WMM_VIDEO: All wireless traffic to the SSID is tagged as video data. This is
recommended for activities like video conferencing.
WMM_BEST_EFFORT: All wireless traffic to the SSID is tagged as "best effort," meaning
the data travels the best route it can without displacing higher priority traffic. This is good
for activities that do not require the best bandwidth throughput, such as surfing the
Internet.
WMM_BACKGROUND: All wireless traffic to the SSID is tagged as low priority or
"background traffic", meaning all other access categories take precedence over this one. If
traffic from an SSID does not have strict throughput requirements, then this access
category is recommended. For example, an SSID that only has network printers connected
to it.
Rate Limiting Define the maximum incoming and outgoing transmission data rate per wireless station
(Per Station
Traffic Rate)
Downlink: Define the maximum incoming transmission data rate (either in mbps or kbps) on a per-
station basis.
Uplink: Define the maximum outgoing transmission data rate (either in mbps or kbps) on a per-
station basis.
Band Select: To improve network performance and avoid interference in the 2.4 GHz frequency band,
you can enable this feature to use the 5 GHz band first. You should set 2.4GHz and 5 GHz
radio profiles to use the same SSID and security settings.
Select standard to have the AP try to connect the wireless clients to the same SSID using
the 5 GHZ band. Connections to an SSID using the 2.4GHz band are still allowed.
Otherwise, select disable to turn off this feature.
VLAN ID Enter the VLAN ID that will be used to tag all traffic originating from this SSID if the VLAN
is different from the native VLAN.
Chapter 35 Object
enhance your network security.
ZyWALL/USG Series User's Guide
595