ZyXEL Communications ZyWALL 110 User Manual page 567

Connect the ZyWALL/USGs.
4
Second Option for Connecting the Bridge Interfaces on Two ZyWALL/USGs
Another option is to disable the bridge interfaces, connect the bridge interfaces, activate device HA,
and finally reactivate the bridge interfaces as shown in the following example.
In this case the ZyWALL/USGs are already connected, but the bridge faces have not been
1
configured yet. Configure a disabled bridge interface on the master ZyWALL/USG but disable it.
Then set the bridge interface as a monitored interface, and activate device HA.
Chapter 34 Device HA
Br0 {ge4, ge5}
A
B
Br0 {ge4, ge5}
Br0 {ge4, ge5}
A
B
Br0 {ge4, ge5}
Br0 {ge4, ge5}
A
B
ZyWALL/USG Series User's Guide
567
Disabled