ZyXEL Communications ZyWALL 110 User Manual page 171

Each field is described in the following table.
Table 78 Configuration > Wireless > AP Management > AP Group > Add/Edit
LABEL DESCRIPTION
General Settings
Group Name Enter a name for this group. You can use up to 31 alphanumeric characters. Dashes and
underscores are also allowed. The name should start with a letter.
Description Enter a description for this group. You can use up to 31 characters, spaces and
underscores allowed.
Radio 1/2 Setting
OP Mode Select the operating mode for radio 1 or radio 2.
AP Mode means the AP can receive connections from wireless clients and pass their
data traffic through to the ZyWALL/USG to be managed (or subsequently passed on to
an upstream gateway for managing).
MON Mode means the AP monitors the broadcast area for other APs, then passes their
information on to the ZyWALL/USG where it can be determined if those APs are friendly
or rogue. If an AP is set to this mode it cannot receive connections from wireless
clients.
Radio 1/2 Profile Select a radio profile from the list. Use Object > AP Profile > Radio to create new
profiles.
Output Power Set the maximum output power of the AP.
If there is a high density of APs in an area, decrease the output power of the managed
AP to reduce interference with other APs.
Note: Reducing the output power also reduces the ZyWALL/USG's effective broadcast
Edit Select an SSID and click this button to reassign it. The selected SSID becomes editable
immediately upon clicking.
# This is the index number of the SSID profile. You can associate up to eight SSID profiles
with an AP radio.
SSID Profile Indicates which SSID profile is associated with this radio profile.
VLAN Settings
Force Overwrite Select this to have the ZyWALL/USG change the AP's management VLAN to match the
VLAN Config configuration in this screen.
Management VLAN Enter a VLAN ID for this AP.
ID
As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the ZyWALL/USG and not
one assigned to it from outside the network.
Port Settings
Model Specific Select the model of the managed AP to display the model-specific port and VLAN
Setting settings in the tables below.
Port Setting You can activate or deactivate a non-uplink port.
# This is the port's index number in this list.
Status This displays whether or not the port is activated.
Port This shows the name of the physical Ethernet port on the managed AP.
PVID This shows the port's PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a
port so that the frames are forwarded to the VLAN group that the tag defines.
VLAN Configuration Use Add to create a new VLAN Configuration. Select a VLAN Configuration first to use
the Edit, Remove, Activate and Inactivate buttons.
Chapter 8 Wireless
radius.
ZyWALL/USG Series User's Guide
171