Console Port Speed - ZyXEL Communications ZyWall 110 User Manual

Enter the Zyxel Device's date in the New Date field.
4
Under Time Zone Setup, select your Time Zone from the list.
5
As an option you can select the Enable Daylight Saving check box to adjust the Zyxel Device clock for
6
daylight savings.
Click Apply.
7
To get the Zyxel Device date and time from a time server
Click System > Date/Time.
1
Select Get from Time Server under Time and Date Setup.
2
Under Time Zone Setup, select your Time Zone from the list.
3
As an option you can select the Enable Daylight Saving check box to adjust the Zyxel Device clock for
4
daylight savings.
Under Time and Date Setup, enter a Time Server Address
5
Click Apply.
6

44.5 Console Port Speed

This section shows you how to set the console port speed when you connect to the Zyxel Device via the
console port using a terminal emulation program.
Click Configuration > System > Console Speed to open the Console Speed screen.
Figure 637 Configuration > System > Console Speed
The following table describes the labels in this screen.
Table 366 Configuration > System > Console Speed
LABEL
Console Port Speed
Apply
Reset
Chapter 44 System
DESCRIPTION
Use the drop-down list box to change the speed of the console port. Your Zyxel Device
supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the console port.
The Console Port Speed applies to a console port connection using terminal emulation
software and NOT the Console in the Zyxel Device Web Configurator Status screen.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
ZyWALL USG Series User's Guide
912
(Table 365 on page 911).