ZyXEL Communications ZyWALL 110 User Manual page 636

35.9.6.1 Adding a RADIUS Server
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen. Click the
Add icon or an Edit icon to display the following screen. Use this screen to create a new AD or
LDAP entry or edit an existing one.
Figure 427 Configuration > Object > AAA Server > RADIUS > Add
The following table describes the labels in this screen.
Table 279 Configuration > Object > AAA Server > RADIUS > Add
LABEL
Name
Description
Server Address
Authentication
Port
Backup Server
Address
Backup
Authentication
Port
Chapter 35 Object
DESCRIPTION
Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Enter the address of the RADIUS server.
Specify the port number on the RADIUS server to which the ZyWALL/USG sends
authentication requests. Enter a number between 1 and 65535.
If the RADIUS server has a backup server, enter its address here.
Specify the port number on the RADIUS server to which the ZyWALL/USG sends
authentication requests. Enter a number between 1 and 65535.
ZyWALL/USG Series User's Guide
636