Table 258 Configuration > Object > Application > Application (continued)> Add Application Rule
LABEL
Application
OK
Cancel
35.5.1.1 Add Application Object by Category or Service
Click Add in Configuration > Object > Application > Application > Add Application Rule to
choose the signatures that should go into this object.
Figure 403 Configuration > Object > Application > Application > Add Application Rule > Add By
Category
Chapter 35 Object
DESCRIPTION
This displays the name of the application signature used in this application rule.
Click OK to save your changes back to the ZyWALL/USG.
Click Cancel to exit this screen without saving your changes.
ZyWALL/USG Series User's Guide
609