ZyXEL Communications ZyWALL 110 User Manual page 467

Figure 323 Configuration > BWM > Create New Object > Add Address
The following table describes the fields in the above screen.
Table 192 Configuration > BWM > Create New Object > Add Address
LABEL
Name
Address Type
IP Address
OK
Cancel
Chapter 27 BWM (Bandwidth Management)
DESCRIPTION
Enter a name for the Address object of the rule.
Select an Address Type from the drop down menu on the right. The Address
Types are Host, Range, Subnet, Interface IP, Interface Subnet, and Interface
Gateway.
Enter an IP address for the Address object.
Click OK to save the setting.
Click Cancel to abandon the setting.
ZyWALL/USG Series User's Guide
467