Setting Wireless Network Protocol Properties; Enabling/Disabling The Wireless Card - Toshiba GL-1020 Administrator's Manual

SETTING WIRELESS NETWORK PROTOCOL PROPERTIES

126
The Administration > Setup > Wireless Network page allows you
to set up the protocols used by client workstations to
communicate with the network via the wireless NIC installed in
the controller. You must configure the wireless protocols before
end users can access the wireless network.
By default, all network protocols are enabled.
You must be logged in as an administrator to set wireless network
protocol properties.

Enabling/Disabling the Wireless Card

1 On the Administration tab, click the
2 Click the
Wireless Network
The Wireless page opens.
Sample Wireless page
3 In the Device area, click the
4 Select
Enable or Disable
5 Click .
Save
subtab.
Setup
link.
drop-down list.
Wireless Card
.
GL-1020 Administrator's Guide