Setting The Smb Protocol - Toshiba E-STUDIO287CS User Manual

Item name
ENABLE Netware • ENABLE — Press this button to
use the NetWare protocol.
• DISABLE — Press this button to
disable the NetWare protocol.
ENABLE • ENABLE — Press this button to
BINDERY enable communication with the
NetWare file server in bindery
mode.
• DISABLE — Press this button to
disable communication with the
NetWare file server in bindery
mode.
ENABLE NDS • ENABLE — Press this button to
enable communication with the
NetWare file server in NDS mode.
• DISABLE — Press this button to
disable communication with the
NetWare file server in NDS mode.
CONTEXT Press this button to enter the NDS
context in which the NetWare print
server for this equipment is located.
This must be entered when you
connect the NetWare file server in the
NDS mode.
TREE Press this button to enter the NDS tree.
This must be entered when you
connect the NetWare file server in the
NDS mode.
FILE SERVER Press this button to enter the NetWare
NAME file server name. It is recommended
that this be entered when you connect
the NetWare file server in bindery
mode.
Memo
• When you press [CONTEXT], [TREE] or [FILE SERVER
NAME], the on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following
page:

P.331 "On-screen keyboard"
• You can enable both bindery and NDS modes at the same
time.
Description
- 285 -

Setting the SMB protocol

You can set the SMB network properties to enable access to
this equipment and SMB printing from a Microsoft Windows
network. Enabling SMB allows you to enable the file sharing
service in addition to SMB printing. Furthermore, if the WINS
server is used to allow file sharing and printer sharing across
segments, you must specify the WINS server address so that
this equipment is visible from the different segments.
Item name
SMB PROTOCOL • ENABLE — Press this button to use
the SMB protocol.
• DISABLE — Press this button to
disable the SMB protocol.
When you select [ENABLE], select the
function that you want to disable in
[RESTRICTION].
RESTRICTION Select whether to disable the machine
sharing or file sharing function. You can
select one of the following:
• NONE — Press this button when not
restricting neither the machine
sharing nor the file sharing function.
Both SMB printing and the file
sharing service using SMB are
enabled.
• PRINT SHARE — Press this button
to disable SMB printing.
• FILE SHARE — Press this button to
disable the file sharing service using
SMB.
NetBIOS NAME Press this button to enter the name by
which this equipment will be displayed
on the Windows network. The NetBIOS
name is set to "MFP<NIC serial
number>" by factory default.
LOGON Displays the Windows network
environment to which this equipment is
logged on. "Workgroup" is displayed if
this equipment is logged on to a
workgroup network and "Domain" if it is
logged on to a domain network.
"Workgroup" or "Domain" can be
specified only from TopAccess. For
details on how to change the setting,
refer to the TopAccess Guide
"Chapter 8: [Administration] Tab
Page".
SETTING ITEMS (ADMIN)
Description
1
2
3
4
5
6
7