Setting The Tcp/Ip Protocol - Toshiba e-STUDIO2303AM User Manual

5 VARIOUS FUNCTIONS
 Setting the TCP/IP protocol
You can set the TCP/IP protocol that is commonly used in most network systems. When using Web-based
utilities such as TopAccess or network features of this equipment such as network printing and network
scanning, you are required to set the TCP/IP protocol.
In the TCP/IP setting operation, you can select the addressing mode, as well as assign the IP address, subnet
mask and default gateway (when manually assigned).
How the TCP/IP protocol must be set depends on your network environment.
TCP/IP
ADDRESS MODE
IP ADDRESS
SUBNET MASK
Item name
ADDRESS MODE
IP ADDRESS
SUBNET MASK
DEFAULT
GATEWAY
Use the digital keys to enter [IP ADDRESS] or [SUBNET MASK] or [DEFAULT GATEWAY].
For entering characters, see the following page.
 P.131 "Character entry"
142 Network Menu List
 STATIC IP (When connecting to a local area network using static IP addresses)
Select [STATIC IP] and specify an IP address when connecting to a local area
network where static IP addresses are used. Also set the subnet mask and
default gateway as required.
 DYNAMIC (When TCP/IP is set by Auto-IP addressing or DHCP server)
Select [DYNAMIC] when you do not know the TCP/IP settings that should be
assigned to the equipment. If [DYNAMIC] is selected when your network supports
the DHCP, the IP address, subnet mask, default gateway, primary WINS server
address, secondary WINS server address, POP3 server address, and SMTP
server address are acquired from the DHCP server. If the DHCP is not supported,
an appropriate IP address is assigned to this equipment by the auto-IP
addressing function. However, the auto-IP addressing may not work properly if a
router is placed in the network.
 NO AUTO IP (When TCP/IP is set using only the DHCP server)
Select [NO AUTO IP] when the equipment is connected to a local area network
with a DHCP server and you want to set the TCP/IP not using the auto-IP
addressing function, but only the DHCP. When [NO AUTO IP] is selected, the IP
address, subnet mask, default gateway, primary WINS server address, secondary
WINS server address, POP3 server address, and SMTP server address are
acquired from the DHCP server, and the IP address assignment by the auto-IP
addressing function disabled.
Press [IP ADDRESS] and enter the IP address of this equipment using the digital
keys.
Enter the subnet mask and default gateway as required.
Use or to switch the active box.
This item is enabled only when [STATIC IP] is selected for [ADDRESS MODE].
Description