Partial, Blank, Or Blurry Pages; Blank Page Printed After Each Job; Incomplete Or Partial Pages Print - Toshiba GL-1020 Administrator's Manual

Corrective Action
This is expected behavior. The banner page is sent as a separate
print job so that output options applied to the print job are not
applied to the banner page as well. Otherwise, the banner pages
would be stapled to the remainder of the job, and multiple copies
of a job would produce multiple copies of the banner page. In
duplex printing, the banner page would be the first page with
page 1 of the document printed on the back, and so on.
The banner page portion of the print job appears in the job list
with "Banner" preceding the job name so that you can tell which
job it is associated with.

PARTIAL, BLANK, OR BLURRY PAGES

Blank Page Printed After Each Job

Problem Description
This results when the Form Feed option is enabled in the driver's
printer settings dialog box (Novell printing only).
Corrective Action
Deselect the Form Feed printer setting. If the problem persists,
form feed may be enabled through the Novell network setup. Use
NWAdmin to check the settings and modify them as necessary.

Incomplete or Partial Pages Print

Problem Description
Most likely, this occurred because the Use Adobe Document
Structuring Convention option was disabled. This feature is
turned on as a default setting. If a user has deselected it, they may
find that partial pages are printed or have problems with the
document printing completely, especially if it is interrupted by
other print jobs. It is best to use the setting when printing
complicated PostScript print jobs, as the driver creates
independent information for each page to assure integrity of the
printed document.
Corrective Action
From the GL-1020 driver's PostScript properties sheet, enable the
Use Adobe Document Structuring Convention option.
287
GL-1020 Administrator's Guide