Printing To The Gl-1020 In Unix - Toshiba GL-1020 Administrator's Manual

PRINTING TO THE GL-1020 IN UNIX

156
Deleting a Print Queue
1 Log on to the root account.
2 Enter the following command:
gl1020rm <queue name>
This command uses the system's
delete the print queue and configuration file.
Changing the Default Values of a Print Queue
1 Study the interface file, named <
stored in the
/etc/lp/interfaces
This file contains all of the default settings and values that
can be set. These values are case sensitive and must conform
to the /bin/sh variable format.
2 To manually edit the configuration file
(
/etc/lp/interfaces/<queue name>.conf),
that consists of the parameter and value.
For example, to change the default orientation to Landscape,
add the following line:
"
orient= LANDSCAPE
LP Command
Use the command (
lp
GL-1020 controller for printing. This command specifies various
printer-specific options using the
command line. The
lp
using various other parameters. Use the
command to view the online document that describes the various
options and parameters that can be set to configure printed
output.
All the options are sent to the GL-1020 controller at the start of a
print job so, if the print file contains its own commands, they may
override the options.
lp
lpadmin
queue name
directory.
"
in Linux) to send a file to the
lpstat
-o option
command also sets other print options
man net_gl1020.1
GL-1020 Administrator's Guide
command to
>, which is
add a line
parameter on the