Setting Wireless Network Protocol Properties - Toshiba GL-1010 Administrator's Manual

8 Press the down arrow to adjust the
9 Select the required power value.
10 Press the down arrow to complete the wireless NIC settings.
11 Press

Setting Wireless Network Protocol Properties

The
Administration > Setup > Wireless Network
protocols used by client workstations to communicate with the network
via the wireless NIC installed in the controller. You must configure the
wireless protocols before end users can access the wireless network.
146
Transmit Power Settings
Wireless NIC Settings
to save your settings.
OK
settings.
Transmit Power
page allows you to set up the
Administrator's Guide
GL-10x0