Setting The Smb Protocol - Toshiba e-STUDIO6540C Management Manual

2 SETTING ITEMS (ADMIN)
 Setting the SMB protocol
You can set the SMB network properties to enable access to this equipment and SMB printing from a Microsoft Windows
network. Enabling SMB allows you to enable the file sharing service in addition to SMB printing. Furthermore, if the WINS
server is used to allow file sharing and printer sharing across segments, you must specify the WINS server address so that
this equipment is visible from the different segments.
Item name
SMB PROTOCOL
RESTRICTION
NetBIOS NAME
LOGON
WINS PRIMARY
WINS SECONDARY
When you press [NetBIOS NAME], the on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following page:
 P.154 "On-screen keyboard"
88 NETWORK
 ENABLE — Press this button to use the SMB protocol.
 DISABLE — Press this button to disable the SMB protocol.
When you select [ENABLE], select the function that you want to disable in [RESTRICTION].
Select whether to disable the printer sharing or file sharing function. You can select one of the following:
 NONE — Press this button when not restricting neither the printer sharing nor the file sharing function.
Both SMB printing and the file sharing service using SMB are enabled.
 PRINT SHARE — Press this button to disable SMB printing.
 FILE SHARE — Press this button to disable the file sharing service using SMB. (Not selectable when
the hard disk is not installed on the equipment)
Press this button to enter the name by which this equipment will be displayed on the Windows network.
The NetBIOS name is set to "MFP<NIC serial number>" by factory default.
Displays the Windows network environment to which this equipment is logged on. "Workgroup" is
displayed if this equipment is logged on to a workgroup network and "Domain" if it is logged on to a domain
network. "Workgroup" or "Domain" can be specified only from TopAccess. For details on how to change the
setting, refer to the TopAccess Guide "Chapter 8: [Administration] Tab Page".
Press this button to enter the IP address of the primary WINS server using the digital keys. The primary
WINS server IP address is required when you want to allow access to this equipment from a different
subnet using NetBIOS name, and the NetBIOS name and workgroup name of the equipment are resolved
using the WINS server.
Use the arrow buttons to switch the active box.
Press this button to enter the IP address of the secondary WINS server using the digital keys. Specify the
IP address of the secondary WINS server as needed when using the WINS server to resolve the NetBIOS
name and workgroup name of this equipment. The secondary WINS server is used when the primary
WINS server is unavailable.
Use the arrow buttons to switch the active box.
Description