Page up arrow
GL-1020 Administrator's Guide
Setting Up WINS and DNS Servers
1
From the TCP/IP Setting menu, press the page-down arrow.
The TCP/IP Setting: Servers screen opens.
Sample TCP/IP Setting: Servers screen on copier control panel
Note: If you have DHCP enabled, it obtains WINS and DNS
server information automatically. Any information you enter
on the TCP/IP Setting: Servers screen overrides the settings
acquired by DHCP.
2
Press
or
PRIMARY
Servers to select it.
3
Enter the IP Address of the Primary or Secondary WINS and/
or DNS server using the control panel's numeric keypad.
4
Press
to save the changes for the duration of the session.
OK
5
Press the page-up arrow to return to the TCP/IP Setting
screen.
Configuring IPX/SPX Protocol Settings
By default, the frame type is set to
option enabled, the controller inspects network traffic to
determine the appropriate frame type. While this makes frame
type discovery automatic, it can also cause network congestion.
for WINS Servers or DNS
SECONDARY
. With the Auto Sense
AUTO
45