Toshiba GL-1020 Administrator's Manual page 43

GL-1020 Administrator's Guide
3 Press
NETWORK SETTING
screen.
Sample Network Setting screen on copier control panel
4 To access specific protocol settings, press the applicable soft
key.
For more details, refer to the following pages in this manual:
TCP/IP server (see
tings on page 44)
WINS server (see
page 45)
IPX/SPX (see
page 45)
Ethernet speed (see
tings on page 47)—only for Ethernet
AppleTalk (see
on page 48)—only for Ethernet
After you are finished updating network or device settings, you
must apply the changes you made during the session. This
process updates and reboots the controller so the modifications
can take effect. If you don't apply your changes, they will be lost
when you press
COPY
Note: Check the configuration page that automatically prints
upon start up to confirm that the changes were applied.
to display the Network Setting
Configuring TCP/IP Protocol Set-
Setting Up WINS and DNS Servers
Configuring IPX/SPX Protocol Settings
Configuring the Ethernet Speed Set-
Configuring AppleTalk Protocol Settings
or the copier times out.
on
on
43