Drive Plate Claw Width; Clutch Spring Free Length; Installation - Suzuki GS850G Service Manual

ENGINE
DRIVE PLATE CLAW WIDTH
INSTALLATION
Using vernier calipers, measure the drive plate
Fit
the
projection of oil pump drive gear
claw
width. If
it
measures less than the limit,
into
the notch
d f
primary driven gear and
replace the drive plate.
confirm both pasts fit snugly while rotating
primary driven gear left and right.
Fig. 7-141
Fig.
7- I44
Drive plate claw width
11.0 rnm
(0.46-0.47 in)
(0.43 in)
CLUTCH SPRING FREE LENGTH
Measure the free length of each coil spring
with vernier calipers and compare the
elastic
strength of each with the specified limit.
Replace
any
spring not within the limit.
Clutch spring free length
1
Standard
I
Limit
I
40.4
mrn
(1.59 in)
38.8 rnm
(1.53
in)