Light Wattage Data; Inspection Of Headlight; Inspection Of Tail/Brake Lights And Turn Signal Lights; Rear Combination Lights - Suzuki GS850G Service Manual

E1,ECTRlCAL SYSTEM
The other is
a mechanical
malfunction-an
inability
of the
switch to respond
to the
applied
pressure which can be checked
by
measuring
the oil pressure when the engine is
running. If the pressure is
low,
the
oil
pump
is malfunctioning; if high, t he switch is
mechanically defective
and must
be replaced.
LIGHT WATTAGE DATA
The lighting system of the Model GS850G
uses
lights with the following rated
watta2es.
INSPECTION OF HEADLIGHT
Confirm that the bulb is
not
burnt out.
*
Confirm that the
wiring is not
damaged
and that there are no
poor connections.
Confirm that each connection is
tightly
fastened.
Confirm that the
beam angle is
correct.
See
page
11-7 for adjustment proccrllrre of the
beam angle.
INSPECTION OF TAILIRRAKE
LIGHTS
AN11 TURN SICNAI, LIGHTS
Confirm that
the
bulb is
not
'burnt out.
Confirm that the wiring i s not damaged
and that there
are no poor connections.
*
Defective grounding
or a qhorz-circuit
exists when the front and rear signal lights
continue
to
stay
l i t after
the
switch has
been turned off.
Confirm
that
each connection
is tightly
fastened.
Loose connections can shorten
bulb l i f e due to vibration.
REAR COMRlNATlON LIGHTS
Fig. 12-52
TURN SIGNAL LIGHTS
Inspection of
speedometer
and tachometer
*
Replace
burnt
out bulbs after
removal
of
meters.
See
page 11-6 for removal
procedures.
I
I
Fig. 12-54