Suzuki GS850G Service Manual page 326

REAR WHEEL
REAR WHEEL REMOVAL AND
DISASSEMBLY
The rear wheel can be removed from
the
ma-
chine in the
same
manner as in the GS850GM
model. Therefore, we discuss the subsequent
operations. (See page
1 1 -42)
m
Bend up
the
lock washer, remove the bolts
and
separate
the driven joint from the wheel.
a Remove
the bushings from the wheel.
REAR WHEEL REASSEMBLY
Drive bushings into the wheel.
5.5
-
6.5
mm
GSfY.70 G T
Insert driven joint into wheel bushing.
m
Place three washers
in
the groove around the
driven joint and tighten six bolts. Then bend
washers to lock the bolts,
0.26
in)
In the
same manner
as in GS850GN, install
disc
plate
on the wheel, and install
rear
wheel on the machine. (See page 11 -45)