Suzuki GS850G Service Manual page 59

ENGINE
Contact point lead wire.
Neutral switch and gear position lead wires.
*
Oil pressure gauge lead wire.
Plug cords.
*
Remove the right and left bolts
t
s e c u r i n ~
the air cleaner body
to the frame.
*
Loosen the four air cleaner clamp screws
i 2 , ,
move the air cleaner
a
little
rearward,
and
remove it from the carburetor. Next,
remove the air cleaner to the right.
Loosen the throttle cable mounting nuts on
the opening side and the closing side GI
to renlove
the respective cables from the
carburetor lever.
Loosen the starter cable lock nut 3
.
and
remove both inner and outer cables from
the carburetor.
Loosen the clamps for the intake manifolds
a n d remove the carburetors by puIling
toward the rear.
Loosen
the clamp screw securing the
propeller shaft boot, and move the pro-
peller shaft boot rearward.
Remove the four bolts securing the uni-
versal joint flange and propeller shaft.
Remove the brake pedal mounting bolt.
Next. move the pedal rehim spring off the
peg, and remove the pedal.
Remove the right footreqt.