Inspection Of Master Cylinder - Suzuki GS850G Service Manual

Fig. 11-78
Snap ring pliers
Take
out
the
piston,
check
valve,
coil
spring
and
primary cup from the bore.
09900-06 I05
NOTE:
Clsing a piece of wood or
soft-melal,
push our
the check
valve coil spring and
primary cup. A void
scratch irtg the bore
wall.
Fig* 1 I - 79
Remove two
screws
(3
securing
the
reservoir to the master cylinder body, and
take off the "0" ring from the body.
INSPECTION OF MASTER CYLINDER
*
Check the
fit of
the
reservoir
with
the
cylinder body. The "0" ring should be
replaced with
a
new one when the master
cylinder is disassembled.
*
Inspect the
primary
cup for
wear
and
damage, and replace
i t with
a
new one if
necessary.
Fig. 11-81
*
Replace the brake hose every
two
years.
ASSEMBLY
*
Reassemble the
master
cylinder
in
the
reverse order to disassembly with the
following additional
steps:
r
Apply brake
fluid to
the cylinder bore and
all the internal parts to be inserted into
the
bore. Do not attempt
to
insert one
part
after another into the bore; assemble the
primary
cup,
coil spring
and
check
valve
together, and
insert
this assembly
into the
bore, taking
care not to
allow the check
valve to
become cocked or
to unseat the
coil:
spring as
it
goes
into the bore.