Steering Stem Assembly - Suzuki GS850G Service Manual

CHASSIS
Remove front fork cover.
*
Remove the
t w o
master cylinder mounting
bolts llii
on
the handle bar.
At this time
rake rare not
to
bend the
oil
hose.
Remove one bolt fastening the
oil hose
joint
at
the lower portion of the steering
stem
and remove
the oil hose
joint
from
the lower
portion of
the steering
stem.
The series
of
parts from the
master
cylinder
to the
caliper
assembly
can
now
be
removed.
Fig. 11-38
11-16
Remove the four
clamp bolts
securing the
handle bar and remove
the handle bar
assembly
with grip, cable
and
handle
bar
switch together, and place them on the
upper part of the motorcycle frame.
Remove the steering stem head center bolt
and remove
steering stem head.
Turn the steering stem nut Ocounter-
clockwise and
remove it using special
tool @
*
At this
time hold the steering stem
carefully to
prevent
it falling.
Steering nut
socket wrench
09940- 1491 0
- -
Remove the upper
dust seal and remove the
steering stem.
4SSEMBLY
Wipe
dirt off
the
upper and
lower beating
races with a rag. In addition, thoroughly
wash the bearings with detergent.
Apply a suitable amount of water-resistant
chassis grease
to the
upper and lower
bearings.