Booklet Creation (Creating A Booklet) - Fuji Xerox ApeosPort-IV C5575 User Manual

Booklet Creation (Creating a Booklet)

This feature allows you to layout the copied pages so that they will be in the right order
when folded and bound as a booklet. You can also shift the pages for binding and add
covers.
When the Finisher-C1 with Booklet Maker (optional) is installed, you can also fold the output
sheets in half, or staple the folded output sheets.
When the Booklet Maker Unit for Finisher-B1 (optional) is installed, you can also crease the
output sheets in half, or staple the creased output sheets.
Important • Ensure that the actual orientation of the original document matches the [Original Orientation]
Note
1
Specify the orientation of the document in
[Original Orientation] on the [Layout
Adjustment] screen.
2
Select [Booklet Creation] on the [Output
Format] screen.
3
Select any option.
Off
Disables this feature.
Create Left/Top Bound Booklet
Copies are made to enable left binding or top binding.
Create Right Bound Booklet
Copies are made to enable right binding.
setting on the [Layout Adjustment] screen.
• When the Finisher-B1 or the Finisher-C1 is installed, do not remove outputs from the finisher tray
until all the output sheets have been delivered.
• The machine copies four pages of the document onto one sheet of paper. If the number of pages in
the booklet is not a multiple of four, the remaining pages will be output as blank pages.
• If [Auto Select] is selected in [Paper Supply], a tray specified in [Auto Paper Off] is automatically
selected. Change the setting if necessary. For information on [Auto Paper Off], refer to "5 Tools" >
"Copy Service Settings" > "Copy Control" in the Administrator Guide.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
Output Format
3
127