Exhaust System Page; Removing And Installing Parts Of The Exhaust System - Skoda OCTAVIA Workshop Manual

OCTAV1A

Removing and installing parts of the exhaust system

Notes:
♦ Removing and installing exhaust manifold
⇒ page 21- 2 or page 21-3.1
♦ Always replace gaskets and self-locking
nuts.
1 - 20 Nm
2 - Tunnel bridge
♦ with hole for aligning exhaust system
⇒ page 26-3
3 - Hanger
♦ fitting position ⇒ Fig. 2
4 - 25 Nm
5 - Hanger
6 - 25 Nm
♦ replace
♦ coat stud bolts with hot bolt paste
G 052 112 A3
Edition 04.04
S00.5110.57.20
Exhaust System
7 - Gasket
♦ replace
8 - Front exhaust pipe
♦ with oxidation catalytic converter
♦ protect catalytic converter against
shocks and blows
♦ avoid a large deflection, max. deflec-
tion 10°
9 - Double clamp
♦ align exhaust system pipe free of
stress before tightening ⇒ page 26-3
♦ fitting position: bolted connection
pointing to left
♦ tighten bolted connections evenly
10 - 40 Nm
11 - Hanger
♦ pay attention to fitting position
12 - Hanger
13 - Rear silencer
♦ the front and rear silencer are installed
as standard as a single part, in the
event of repairs the front and rear si-
lencer are delivered separately; to be
connected together with a double
clamp.
♦ align exhaust system free of stress
⇒ page 26-3
♦ replace middle or rear silencer ⇒ page
26-2
26
------------ 26-1 ------------