Skoda OCTAVIA Workshop Manual page 14

10
------------ 10-6 ------------
Removing and Installing Engine
Models fitted with manual gearbox
K - Mark installation position of the shift cable
-B- relative to the gearbox shift lever.
- Take off balancing weight -A- and shift cable
-B- at shift lever.
- Pull selector cable off relay lever driver -C-;
raise lug in direction of arrow for this step.
- Unclip hose line of slave cylinder at cable
support.
K - Take cable support of gearbox -arrow- and
place down to the side.
K - Remove slave cylinder -arrow- and place
down to the side, secure with wire, do not
open line system.
Note:
Do not depress clutch pedal.
OCTAVIA
Edition 05.01
S00.5110.55.20