Skoda OCTAVIA Workshop Manual page 91

OCTAV1A
7 - To heat exchanger for heating
♦ connection diagram for coolant hoses
⇒ page 19-2.4
8 - Radiator for exhaust gas recirculation
♦ only on engines ALH with automatic
gearbox
9 - From connection fitting
♦ connection diagram for coolant hoses
⇒ page 19-2.4
10 - 10 Nm
11 - To expansion reservoir
♦ connection diagram for coolant hoses
⇒ page 19-2.4
12 - Top coolant hose
♦ attached to bulkhead
♦ connection diagram for coolant hoses
⇒ page 19-2.4
13 - O-ring
♦ check tightness
♦ replace
14 - Coolant temperature sender -G62-
♦ with sender for coolant temperature
display -G2-
15 - Retaining clips
♦ check tightness
16 - To heat exchanger for heating
♦ connection diagram for coolant hoses
⇒ page 19-2.4
Edition 04.04
S00.5110.57.20
Cooling System
17 - From heat exchanger for heating
♦ connection diagram for coolant hoses
⇒ page 19-2.4
18 - 10 Nm
19 - Connection fitting
20 - Coolant pipe
♦ connection diagram for coolant hoses
⇒ page 19-2.4
21 - To top radiator
♦ connection diagram for coolant hoses
⇒ page 19-2.4
22 - To bottom expansion reservoir
♦ connection diagram for coolant hoses
⇒ page 19-2.4
23 - To bottom radiator
♦ connection diagram for coolant hoses
⇒ page 19-2.4
24 - Connection fitting
♦ for coolant regulator
25 - Coolant regulator
♦ removing and installing ⇒ page 19-7
♦ pay attention to fitting position
♦ inspecting: Heat thermostat in water
bath
♦ opening start approx. 85 °C
♦ End approx. 105 °C
♦ Opening stroke at least 7 mm
26 - Oil cooler
♦ removing and installing ⇒ page 17-2
19
------------ 19-2.3 ------------