Removing And Installing Camshaft - Skoda OCTAVIA Workshop Manual

15
------------ 15-16 ------------
Cylinder Head, Valve Gear
♦ After carrying out work on the valve gear,
carefully crank engine at least 2 revolutions
to ensure that no valve touches the piston
when the engine is started.

Removing and installing camshaft

Special tools, testers and aids required
♦ Torque wrench
♦ Counterholder MP 1-216
♦ Adjusting straightedge MP 1-312
♦ Puller T40001 with hook T40001/2 and
T40001/3
Removing
- Remove top toothed belt guard, cylinder head
cover and vacuum pump.
K - Position crankshaft on TDC of cylinder 1 (ve-
hicles with manual gearbox).
Note:
Position crankshaft on TDC of cylinder 1 when
engine was removed ⇒ page 13-11.
K - Position crankshaft on TDC of cylinder 1 -ar-
rows- (vehicles with automatic gearbox).
OCTAV1A
Edition 04.04
S00.5110.57.20