Removing And Installing Fuel Gauge Sender; Removing And Installing Fuel Tank - Skoda OCTAVIA Workshop Manual

20
------------ 20-4 ------------
Fuel Supply System
Removing and installing fuel gauge
sender
Special tools, testers and aids required
♦ Wrench for union nut MP 1-227
Removing
- Unscrew cover (below rear seat).
- Slacken fuel feed line and fuel return-flow
line and detach.
- Separate multipin connector for fuel gauge.
K - Use MP 1-227 to slacken union nut and pull
closing flange and sender out of the fuel tank.
Installing
K - Pay attention to installation position:
♦ Marking on closing flange must be aligned
with marking on fuel tank -arrows-.
♦ Blue return-flow line -1- to connection
marked with ”R”.
♦ Black feed line -2- to connection marked
with ”V”.

Removing and installing fuel tank

Special tools, testers and aids required
♦ Fuel extractor (e.g. V.A.G 1433 A)
♦ Engine/gearbox lifter (e.g. V.A.G 1383 A)
Removing
- Use fuel extractor (e.g. V.A.G 1433 A) to
empty fuel tank.
- Remove rear axle:
⇒ Running Gear; Repair Group 42; Remov-
ing and installing rear axle
OCTAVIA
Edition 06.99
S00.5110.53.20