Removing And Installing Engine - Skoda OCTAVIA Workshop Manual

OCTAV1A
Edition 04.04
S00.5110.57.20

Removing and Installing Engine

Removing and installing engine
Special tools, testers and aids required
♦ Workshop crane (e.g. V.A.G 1202 A)
♦ Catch pan (e.g. V.A.G 1306)
♦ Torque wrench
♦ Pliers for spring strap clips
♦ Engine mount MP 1-202
♦ Engine mount T 10012
♦ Bolt M10 x 25/8.8
♦ Engine/gearbox jack (e.g. V.A.G 1383 A)
♦ Double ladder (e.g. VAS 5085)
♦ Lifting device MP 9-201
♦ Grease G 000 100
♦ Cable strap
♦ Wire
♦ Adhesive tape
Removing
Notes:
♦ The engine is removed downwards together
with the gearbox.
♦ All cable straps that have to be loosened
when the engine was removed must be fitted
again in the same location.
♦ The hose connections are secured with
screw-type clips, spring-type clips or clamp-
type clips.
♦ Always replace clamp-type clips with spring-
type clips or screw -type clips.
♦ Fuel lines at the engine must only be secured
with spring-type clips. The use of clamp-type
or screw-type clips is not allowed.
♦ Use pliers for spring strap clips for installing
the spring strap clips.
10
------------ 10-1 ------------