Skoda OCTAVIA Workshop Manual page 103

OCTAVIA
Edition 11.96
S00.5110.51.20
Cooling System
Models with air conditioning
- Pull out radiator slightly together with con-
denser.
K - Detach clip -arrow- for attaching refrigerant
pipe.
Continued for all models
- Remove fan shroud (4 bolts).
Note:
When removing and installing the fan shroud,
ensure that the radiator ribs are not damaged.
- Carefully take out the radiator downward.
Installing
Installation is performed in the reverse order;
pay attention to the following points:
K - Tighten thermostatic switch -1- to
35 Nm.
- Fit on the brackets -2- and -3- at the radiator,
as illustrated.
- Tighten the bolts for attaching the fan shroud
and radiator mounts to
10 Nm.
- On models with air conditioning, tighten the
bolts for attaching condenser and brackets
for refrigerant pipes to
10 Nm.
- Replace O-rings in the connection fittings of
the coolant hoses.
- Insert drain plug for coolant.
- Fill system with coolant ⇒ page 19-3.
- Install headlights:
⇒ Electrical System; Repair Group 94; Remov-
ing and installing headlights
- Electrical connections and routing:
⇒ Current Flow Diagrams, Electrical Fault
Finding and Fitting Locations binder
19
------------ 19-11 ------------