Skoda OCTAVIA Workshop Manual page 134

26
------------ 26-4.2 ------------
Exhaust System
K Fig. 1 Separation point
♦ When replacing middle silencer or rear si-
lencer
♦ Marked by three recesses around circum-
ference of exhaust pipe
Replacing middle silencer or rear
silencer for 4x4 vehicles
Special tools, testers and aids required
♦ Torque wrench
♦ Body saw (e.g. V.A.G 1523)
Work procedure
- Separate exhaust pipe at the separation point
-arrow- at right angles with a body saw (e.g.
V.A.G 1523).
- Mark on both sides 50 mm from the separa-
tion point.
- Position double clamp on both sides of the
markings.
- Align exhaust system free of stress.
- Align rear silencer horizontally.
- Tighten bolted connections of double clamp
evenly to 40 Nm.
- Fitting position of double clamp: Bolted con-
nection points toward left.
OCTAV1A
Edition 04.04
S00.5110.57.20