Removing Expansion Cards - Toshiba M500D User Manual

60
Connecting Components
Expansion cards

Removing expansion cards

1 Remove the bezel and side panel. For instructions, see
"Removing and installing the bezel and side panel" on
page 24.
2 Remove the screw securing the expansion card to the server
chassis. Save the screw for future use.
3 Grasp the expansion card firmly and lift it carefully to
separate it from the expansion card connector on the system
board. Place the expansion card in an antistatic bag.
4 Insert the expansion slot cover in the opening to the expansion
slot.
5 Reinstall the bezel and side panel. For instructions, see
"Removing and installing the bezel and side panel" on
page 24.
Adding and removing an AGP video card
The top slot is the AGP video card slot. Add and remove an AGP
video card using the same methods and precautions as with other
adapter cards.
The Gigabyte GA-620, 8 MB video card has a "turbo" mode
jumper. The server ships with the video card's engine clock speed
and memory clock speed set to "normal"—the system's default
setting.
CAUTION: The Toshiba M500D server does not support the
Gigabyte GA-620 video card's Turbo mode. Toshiba
recommends that you use the "normal" mode to ensure
reliability. Using the Turbo mode setting may damage your
system.