Table of Contents
Advertisement
Installing expansion cards
1
Remove the bezel and side panel. For instructions, see
"Removing and installing the bezel and side panel" on
page 24.
2
Remove the expansion slot cover protecting the slot where
you are going to install the expansion card. To do this, press
the cover in the direction of the arrow shown in the illustration
below. Save the cover for future use.
Removing an expansion slot cover
3
Align the contacts on the edge of the expansion card with the
expansion slot connector on the system board, then press
down on the card to secure it in the connector. Using "Screw
A" shown in the table of "Toshiba supplied hardware items"
on page 23, secure the expansion card in the slot.
Installing an expansion card
4
Reinstall the bezel and side panel. For instructions, see
"Removing and installing the bezel and side panel" on
page 24.
Connecting Components
Expansion cards
59
Advertisement
Table of Contents
