Expansion Cards; Irq Setup - Toshiba M500D User Manual

Hide thumbs Also See for M500D:
Table of Contents

Advertisement

58
Connecting Components

Expansion cards

Reinstall the bezel and side panel. For instructions, see
7
"Removing and installing the bezel and side panel" on
page 24.
NOTE: Use only SCSI devices that Toshiba recommends.
Toshiba assumes no responsibility for devices not
specifically recommended.

Expansion cards

The system board supports PCI expansion cards. To configure the
system for new devices, refer to "System Configuration Setup" on
page 69.
Expansion slot hierarchy

IRQ setup

Set an appropriate IRQ level for the expansion card.
NOTE: Some expansion cards require you to change their
jumper or DIP switch settings. Refer to the manufacturer's
manual for the correct settings.
AGP
PCI-1
PCI-2
PCI-3
PCI-4
PCI-5

Advertisement

Table of Contents
loading

Table of Contents