Table of Contents
Advertisement
Item
Adding a SCSI hard disk drive
Parameter/Setting
SCSI Device
Configuration
Initiate Sync
Negotiation: Yes
Initiate Wide
Negotiation: Yes
Sync Transfer Rate
(MD/Sec.): 80.0
Enable Disconnection:
Yes
Send Start Unit
Command: Yes
BIOS Multiple LUN
Support: No
Include in BIOS Scan:
Yes
Connecting Components
Description
For detailed settings of each
SCSI device (SCSI ID). When
you select this item, the
following options appear:
When this option is set to Yes,
the adapter initiates wide
negotiation with each 16-bit
SCSI device.
Sets the maximum
synchronized transfer rate of
the on-board SCSI controller.
When this option is set to Yes,
a SCSI device can disconnect
temporarily from the bus,
while the host adapter
continues to do other bus
operations.
Controls whether the SCSI
Start Unit Command is sent to
the SCSI device.
Controls whether the BIOS
supports multiple logical units.
Controls whether the SCSI
device is included in the BIOS
scan.
53
Advertisement
Table of Contents
