Table of Contents
Advertisement
SCSI configuration
SCSI installation guidelines
When installing SCSI HDDs, start at the bottom of the 3.5-inch
device bay and work up to the top of the 5.25-inch device bay.
SCSI HDD installation order
Jumper settings for SCSI HDDs
To connect a hard disk drive to the SCSI-chain, you must set the
jumper for each drive according to its position in the chain.
1
Locate the option jumper blocks on the SCSI drive.
C
o
n
n
e
c
t
o
r
Location of option jumper blocks (top view)
Connecting Components
Adding a SCSI hard disk drive
Position #A
J6
Option Jumper Block J-6
Position #G
Position #1
Option Jumper Block J-4
J4
Position #12
SCSI HDD 3 (SCSI-ID = 3)
SCSI HDD 2 (SCSI-ID = 2)
SCSI HDD 1 (SCSI-ID = 1)
SCSI HDD 0 (SCSI-ID = 0)
45
Advertisement
Table of Contents
