96
System Configuration Setup
Setup
PNP OS Installed - Specifies whether the server's operating
system supports Plug and Play.
Yes
No (default)
Resources Controlled by
Manual (default)
Auto
Reset Configuration Data - Clears PnP information.
Disable (default)
Enable
IRQ (3,4,5,7,9,10,11,12,14,15), DMA (0,1,3,5,6,7) assigned
to - Assigns each IRQ and DMA. By default, IRQ 7, 12, 14,
and 15 are "legacy ISA" and others are "PCI/ISA PnP".
Legacy ISA
PCI/ISA PnP
Used MEM base address - Assigns the memory base address
for each interface.
N/A (default)
C800 to DC00
Operating system supports Plug and Play
Operating system doesn't support Plug and
Play
You can set the system resources (I/O
Address, IRQ & DMA channels) used by
devices
BIOS automatically assigns these PnP
resources
Will not clear PnP information
The resource is used by a PnP device (PCI)
The resource is used by legacy ISA devices
The resource is used by PCI PnP devices
Memory base address not assigned
Selects the assigned memory base address