Install the additional HDD in the drive carrier and secure it
7
with two screws. Use "Screw A" listed in "Toshiba supplied
hardware items" on page 23.
CAUTION: To prevent damage to the HDD or the data it
contains, avoid subjecting the drive to shock or vibration.
Rails
Placing a HDD into the drive carrier
Tighten the eight screws loosened in step 5.
8
Position the drive carrier into the server and secure it with two
9
screws. Insert the drive carrier so that the rails on the upper
side of the carrier latch to the ones in the server. Push the drive
carrier in until you hear a click—indicating that carrier is
locked in place.
Inserting the drive carrier into the server
Connecting Components
Adding an IDE hard disk drive
41