Table of Contents
Advertisement
20
Connecting Components
Installing optional devices
HINT: Toshiba recommends using Toshiba-certified devices
or peripherals. Consult your authorized service repair office,
sales office, or log on to the Web site at
www.support.toshiba.com for recommended devices.
Selecting a workplace
Before performing server maintenance, select a place that
does not have high humidity and is as free of dust and direct
sunlight as possible.
The ambient temperature and humidity should range between
50°F to 95°F (10°C to 35°C) and 30% to 80% RH. Avoid
exposing the server to sharp temperature fluctuations that
could cause condensation.
Never install or remove devices in a static-inducing
environment (on a carpet, for example). Electronic devices
can fail if they are exposed to electrostatic discharge (ESD).
Working safely
Make sure you read and understand the instructions and
precautions in this guide before performing server
maintenance.
Perform the steps in each procedure in the order written.
Before disconnecting any cables, check their positions to
make sure you reconnect them correctly.
Check cable connectors for broken or bent pins. If a cable
connector has screws, tighten the screws finger-tight when
securing the cable.
If a failure occurs, consult your authorized service provider.
Advertisement
Table of Contents
