Table of Contents
Advertisement
Menu composition
When you start the SCSI utility, the following Adaptec
®
SCSISelect
option screen appears:
Adaptec AHA 2940U2B < SCSISelect(TM)>Utility vX.XX
AHA-2940U2B at Bus=xxh Device=xxh.
Would you like to configure the host adapter,
or run the SCSI disk utilities? Select the
option and press<Enter>. Press <F5> to switch between
color and monochrome mode.
OPTION
Configure/View Host Adapter Setting
SCSI Disk Utilities
Arrow Keys to move cursor, <Enter> to select option, <Esc> to exit (*=default)
Adaptec SCSISelect option screen
Basic SCSI utility operations
Use the following keys to perform basic SCSI utility operations:
Esc
Return to the preceding screen
Enter
Select an item
↑
Return to the preceding item
↓
Proceed to the next item
SCSI disk utility operating procedures
To set up the utility:
1
Use the up arrow (
item you wish to change.
2
Press
Enter
The selected menu or submenu appears.
3
Make your changes.
4
After setting all the necessary values, save the data.
5
Press
a few times and follow the on-screen instructions.
Esc
Connecting Components
Adding a SCSI hard disk drive
Bus:Device:Channel
00:0C:A
00:OC:B
↑
) and down arrow (
to select the item.
®
↓
) keys to highlight the
51
Advertisement
Table of Contents
