Table of Contents
Advertisement
56
Connecting Components
Adding SCSI I/O devices
Set the SCSI-ID of the SCSI device.
2
Position the rails on the SCSI device and secure them with
3
four screws. Use "Screw B" designated in the table "Toshiba
supplied hardware items" on page 23.
Installing the rails for a SCSI device
4
Remove the screws securing the 5.25-inch shield cover and
store the cover in a safe place.
Removing the shield
5
Insert the SCSI device into the slot and secure it with two
screws.
Inserting the SCSI device
Advertisement
Table of Contents
