Buell 2007 FIREBOLT Service Manual page 337

HOME
b1016x3x
7. See Figure 3-154. Assemble crankcase halves together.
a. Apply a thin coat of GREY HIGH-PERFORMANCE
SEALANT (Part No. 99650-02) to crankcase joint
faces.
b. Slide outer race in right crankcase over pinion shaft
and bearing assembly.
c. Apply LOCTITE 271 to the last few threads and
tighten fasteners to 15-19 ft-lbs (20-26 Nm).
NOTE
According to manufacturing, there is no torque sequence to
follow when tightening crankcase fasteners.
3-106 2007 Buell Firebolt: Engine
D
Indicates Bolt Pattern Location
Figure 3-154. Crankcase Fasteners
One Behind Shifter Mechanism