Case Disassembly For Transmission Removal - Buell 2007 FIREBOLT Service Manual

HOME

CASE DISASSEMBLY FOR TRANSMISSION REMOVAL

GENERAL
The rear compartment of the left and right crankcase halves
form the transmission case. Servicing of transmission compo-
nents requires removing the engine and disassembling (split-
ting) the crankcase.
RIGHT CRANKCASE REMOVAL
1. Remove transmission sprocket. See
SION SPROCKET.
2. Remove engine from chassis. See
MOTORCYCLE FOR ENGINE
3. Support engine using ENGINE SUPPORT STAND (Part
No. HD-42310/HD-43646 or HD-43682).
4. Disassemble top end. See
5. Disassemble gearcase. See
AND CAM GEARS.
6. Remove primary cover. See
7. Remove clutch assembly, primary chain and engine
sprocket. See 6.5 PRIMARY
Figure 6-46. Hex Fastener Countershaft Retainer
8. See Figure 6-46. Place transmission in 1st gear. Remove
hex fastener.
6-26 2007 Buell Firebolt: Drive/Transmission
6.16 TRANSMIS-
3.4 STRIPPING
SERVICE.
3.6 CYLINDER HEAD.
3.18 GEARCASE COVER
6.2 PRIMARY COVER.
CHAIN.
11340
8618
Figure 6-47. Shifter Drum Neutral Detent
9. See Figure 6-47. Place transmission in neutral. Remove
neutral switch to ensure shifter drum detent is visible
indicating transmission is in correct location.
11463
Figure 6-48. Shifter Drum and Mainshaft
(Transmission in Neutral)
10. See Figure 6-48. With transmission still in neutral, scribe
a line on the end of the shifter drum at the 12 o'clock
position for later reference.
6.8