Buell 2007 FIREBOLT Service Manual page 199

HOME
b1169x2x
1. Primary cover
2. Clutch inspection cover
3. Engine shift lever
4. Shift pedal assembly
5. Shift linkage assembly
6. Flange head bolt
7. Drain plug
8. Sleeve, shift lever
9. Bearings, shift lever
14. Remove complete shift assembly.
a. Remove flange bolt (6) from primary cover.
b. Remove engine shift lever assembly (3). Do not
scratch primary cover.
8413
3
1. Outer ramp and hook
2. Coupling
3. Cable end
Figure 2-97. Clutch Release Mechanism
15. See Figure 2-97. Remove the outer ramp and hook (1)
from the cable end (3) and coupling (2). Remove cable
end from slot in coupling. See
MECHANISM.
2-68 2007 Buell Firebolt: Chassis
2
1
7
Figure 2-96. Primary Cover and Shifter Assembly
1
2
6.3 CLUTCH RELEASE
4
3
Figure 2-98. Clutch Cable and Fitting
16. See Figure 2-98. Unscrew the cable fitting from the pri-
mary cover. Remove clutch cable and fitting.
17. Remove and discard o-ring on the clutch cable fitting.
5
9 8
6
9