Subframe Tail Assembly And Body Work - Buell 2007 FIREBOLT Service Manual

HOME

SUBFRAME TAIL ASSEMBLY AND BODY WORK

DISASSEMBLY
1. Remove seat and pillion. See
11 1
WARNING
Disconnect negative (-) battery cable first. If positive (+)
cable should contact ground with negative (-) cable con-
nected, the resulting sparks can cause a battery explo-
sion, which could result in death or serious injury.
(00049a).
2. Disconnect battery by unthreading fastener removing
negative cable (black) from battery first. See
TERY MAINTENANCE.
b0956x2x
11
10
1. Upper tail body work
2. Upper tail body work fasteners
3. Passenger seat keylock
4. Passenger seat lock plate
5. Passenger seat lock retainer
6. Passenger seat lock cable
7. Subframe tail assembly
2.38 SEAT.
WARNING
1.5 BAT-
13
14
12
9
Figure 2-119. Subframe Tail Assembly and Body Work Assembly
3. See Figure 2-119. Remove upper body work (1) from
subframe tail assembly (7).
a. Remove body work fasteners (2).
b. Disconnect passenger lock cable (6) by removing
cable from seat lock plate (4) and ferrule from key-
lock (3). ]
c. Lift upper tail body work (1) off subframe tail assem-
bly (8).
4. Remove passenger seat latch (14) from rear of subframe
tail assembly.
1
6
7
8
8. Subframe tail assembly fasteners
9. Lower tail body work
10. Lower tail body work fasteners
11. Trunk
12. Fastener
13. License plate bracket
14. Passenger seat latch and fastener
2007 Buell Firebolt: Chassis
2.36
2
3
4
5
2-89