Brake Pedal - Buell 2007 FIREBOLT Service Manual

HOME

BRAKE PEDAL

REMOVAL
1. See Figure 2-36. Remove cotter pin (7) and discard.
2. Remove clevis pin (2).
3. Remove pedal fastener (5).
4. Remove shift brake pedal sleeve (4).
5. Remove pedal bushings (3).
6. Remove brake pedal (6).
INSTALLATION
1. See Figure 2-36. Install pedal bushings (3).
2. Install shift brake pedal sleeve (4).
3. Install brake pedal (6) using LOCTITE 271 (Red) and
tighten fastener (5) to 22-24 ft-lbs (30-33 Nm).
4. Install clevis pin (2).
5. Install new cotter pin (7).
2-26 2007 Buell Firebolt: Chassis
b0938x2x
1
2
3
4
5
6
1. Rear master cylinder body
2. Clevis pin
3. Pedal bushings (2)
4. Shift brake pedal sleeve
5. Brake pedal fastener
6. Brake pedal
7. Cotter pin
Figure 2-36. Brake Pedal Assembly
2.9
7
3