Buell 2007 FIREBOLT Service Manual page 256

HOME
10502
1. Wire form retainer
2. Clutch cable adjuster boot
3. Lower retaining clamp
Figure 3-20. Clutch Cable Retaining Clamps and
Adjuster Boot
29. See Figure 3-20. Disconnect clutch cable.
a. Remove wire form retainer and lower retaining
clamp.
b. Slide clutch cable adjuster boot (2) up to access
clutch adjuster.
c. Loosen clutch adjuster to release tension from hand
lever.
d. Remove clutch cable ferrule from hand lever.
30. See Figure 3-21. Remove two fasteners (5) and remove
sidestand assembly.
31. Support engine with wide scissors jack.
1
2
3
10310
1. Sidestand assembly
2. Bracket fasteners (2)
Figure 3-21. Sidestand Assembly (Extended)
32. See Figure 3-21. Remove sidestand assembly.
2007 Buell Firebolt: Engine
2
1
b0946c2x
3-25